|
1. >Home
2. >About Us
3. >Portfolio
4. >Services
5. >Employees
6. >Tools
7. >Links
8. >Construction
|
Here are some convient tools that can be used for any pipeline related
project you might have.
General
- Linefill
(Bbl/mile) for any diameter pipe.
- Horsepower (BPH) for pumps, knowing
system efficiency, pressure differential, flow rate, etc.
- Vapor Pressure (psia)
for various light hydrocarbons.
- Determining hydrotest
pressure.
- Allowable distance between
pipe supports, varied by pipe size, diameter, etc.
back
to top ^
Piping
Design
- Pipe size data sheets.
- Pipe fitting size data
sheets.
- 90 degree, long radius, std. wall elbows
- 90 degree, long radius, heavy wall elbows
- 90 degree, long radius, extra heavy wall
elbows
- 90 degree, short radius, std. wall elbows
- 90 degree, short radius, heavy wall elbows
- 90 degree, long radius, std. wall
reducing elbows
- 90 degree, long radius, heavy wall
reducing elbows
- 45 degree, long radius, std. wall elbows
- 45 degree, long radius, heavy wall elbows
- 45 degree, long radius, extra heavy wall
elbows
- std. wall, straight tee
- heavy wall, straight tee
- extra heavy wall, straight tee
- std. wall, reducing tee
- heavy wall, reducing tee
- long radius, 180 degree, std. wall return
- long radius, 180 degree, heavy wall return
- short radius, 180 degree, std. wall return
- short radius, 180 degree, heavy wall return
- ANSI valve dimensions.
back
to top ^
Hydraulics
- Shell-MIT Steady State
Hydraulic Spreadsheet
- Darcy-Weisbach
Steady State Hydraulic Spreadsheet
- Viscosity conversions
- Determining hydrotest
pressure.
- Looped lines
- Pressure loss per mile
chart
- Velocity (ft./sec.)
in pipe at various flow rates and diameters.
- Fluid properties for various refined
products.
back
to top ^
In-Line
Inspection
- Questionaire worksheet for ILI tool runs
- Minimum bend radius for ILI tools
- Trap lengths to handle
most ILI tools
- Remaining Strength of Pipe
Containing Smooth Metal Loss Anomaly
- B31G Allowable Length of
Metal Loss Tables
- B31G Calculation
- 0.85dL Allowable Length
of Metal Loss Tables
- 0.85dL Calculation
back
to top ^
Cost
Estimating
- Cost per inch diameter per
foot new construction, ROT
- Cost per inch diameter per
foot conventional bore, ROT
- Cost per inch diameter per
foot HDD, ROT
- Cost per mile smart
pigging, various tools.
- Cost per inch diameter per
foot, line lowering.
- Cost per inch diameter per
foot, various coating systems.
- Various material costs
back
to top ^
|
